ECU Logo
 
Division of Academic Affairs
Undergraduate Catalog 2012-13


BlackBoardIT Help DeskPirateIDIndexEmail and PhoneOneStopCalendarAccessibility

College of Technology and Computer Science


Department of Technology Systems


Tijjani (TJ) Mohammed, Interim Chair, Suite 202 Science and Technology Building

Admission

Upon admission to the university, students may declare a major in one of the following degree programs: design, industrial distribution and logistics, industrial engineering technology, or information and computer technology. The design, industrial distribution and logistics, and information and computer technology degree programs are accredited by the Association of Technology, Management, and Applied Engineering. The minimum degree requirement is 126 s.h. of credit.

The bachelor of science in industrial technology, which is also accredited by the Association of Technology, Management, and Applied Engineering, is designed specifically to meet a broad range of needs of transfer students from community colleges. Students accepted to ECU may declare an intent to enroll in the bachelor of science in industrial technology program, but must apply for admission to a specific concentration. Students not yet accepted into this program will not be allowed to enroll in concentration courses. Acceptance into the program may require additional qualifications such as industry certifications and additional courses depending on the chosen concentration, the earned associate degree, and the student’s background. All students pursuing a bachelor of science in industrial technology through distance education (online) are required to complete ITEC 3000 in their initial semester of enrollment at East Carolina University.

Admission to the online BS in industrial technology program requires ITEC 3000 with a minimum grade of C (2.0). Those ECU students intending to transfer to a technology systems degree program from other campus programs must have at least a 2.0 GPA.

BS in Design

Robert A. Chin, Coordinator, 207 Science and Technology Building

The design program is accredited by the Association of Technology, Management, and Applied Engineering. Minimum degree requirement is 126 s.h. credit as follows:

  1. Foundations curriculum requirements (For information about courses that carry foundations curriculum credit see Liberal Arts Foundations Curriculum) including those listed below - 42 s.h.
    All concentrations:
    COMM 2410. Public Speaking (3) (F,S,SS) (FC:FA) or COMM 2420. Business and Professional Communication (3) (F,S,SS) (FC:FA)
    ECON 2113. Principles of Microeconomics (3) (F,S,SS) (FC:SO)
    MATH 1065. College Algebra (3) (F,S,SS) (FC:MA) (P: Appropriate score on math placement test or math section of the SAT/ACT)
    PHIL 2274. Business Ethics (3) (WI*) (F,S,SS) (FC:HU) or PHIL 2275. Professional Ethics (3) (WI*) (F,S,SS) (FC:HU)
    PHYS 1250. General Physics (3) (F,S,SS) (FC:SC) (P for 1250: MATH 1065 or 1066)
    PHYS 1251. General Physics Laboratory (1) (F,S,SS) (FC:SC) (C: PHYS 1250 or 2350)
    PSYC 1000. Introductory Psychology (3) (F,S,SS) (FC:SO)
    PSYC 3241. Personnel and Industrial Psychology (3) (F,S,SS) (FC:SO) (P: PSYC 1000 or 1060)
    Architectural Technology:
    GEOL 1700. Environmental Geology (4) (F,S) (FC:SC)
    Mechanical Technology:
    PHYS 1260. General Physics (3) (F,S,SS) (FC:SC) (P PHYS 1250)
    PHYS 1261. General Physics Laboratory (1) (F,S,SS) (FC:SC) (C PHYS 1260 or 2260)
  2. Core - 53 s.h.
    DESN 2034, 2035. Engineering Graphics I (3,0) (F,S) (P: ITEC 2000 or MIS 2223)
    DESN 2036, 2037. Computer-Aided Design and Drafting (3,0) (F,S) (P: DESN 2034)
    DESN 3032, 3033. Engineering Graphics II (3,0) (S) (P: DESN 2036; ITEC 2080; PHYS 1250; C: ITEC 2090; or program coordinator approval)
    DESN 4030, 4031. Descriptive Geometry (3,0) (S) (P: DESN 3032; MATH 1074)
    FINA 2244. Legal Environment of Business (3) (F,S,SS)
    IENG 2020, 2021. Materials and Processes Technology (3,0) (WI*) (F,S) (P/C: ITEC 2000 or MIS 2223)
    ITEC 2000. Industrial Technology Applications of Computer Systems (3) (F,S) or MIS 2223 Introduction to Computers (3) (F,S,SS)
    ITEC 2054, 2055. Electricity/Electronics Fundamentals (3,0) (F,S) (P/C: MATH 1074 or 1083 or 1085)
    ITEC 2080, 2081. Thermal and Fluid Systems (3,0) (F,S) (P: IENG 2020)
    ITEC 2090, 2091. Electromechanical Systems (3,0) (F,S) (P: ITEC 2054)
    ITEC 3200. Introduction to Statistical Process Control (3) (F,S) (P: MATH 1065 or 1066; ITEC 2000 or 3000 or MIS 2223) or MATH 2283. Statistics for Business (3) (F,S,SS) (FC:MA)
    ITEC 3290. Technical Writing (3) (WI) (F,S,SS) (P: ENGL 1200)
    ITEC 3292. Industrial Safety (3) (F,S) (P: Junior standing)
    ITEC 3300. Technology Project Management (3) (F,S) (WI) (P: ENGL 1200; ITEC 2000 or MIS 2223)
    ITEC 3800. Cost and Capital Project Analysis (3) (F,S) (P: MATH 1065; ITEC 2000 or 3000 or MIS 2223) or FINA 3004. Survey of Financial Management (3) (F,S)
    ITEC 4293. Industrial Supervision (3) (WI) (F,S) (P: Senior standing or consent of instructor) or MGMT 3202. Fundamentals of Management (3) (F,S,SS)
    ITEC 4300. Quality Assurance Concepts (3) (F,S) (P: ITEC 3200 or MATH 2283)
    MATH 1074. Applied Trigonometry (2) (F,S,SS) (P: MATH 1065)
  3. Concentration area (Choose one) - 23 s.h.
    Architectural Technology:
    BIOL 1060. Environmental Biology (4) (F,S,SS) (FC:SC)
    BIOL 1061. Environmental Biology Laboratory (1) (F,S) (FC:SC)
    DESN 3030, 3031. Architectural Drafting (3,0) (F) (P: DESN 2036 or IDSN 2281; ITEC 2080; or program coordinator approval)
    DESN 3036, 3037. Architectural Design and Drafting (3,0) (F) (P: DESN 3030, 3032; or program coordinator approval)
    DESN 3038, 3039. Sustainable Design (3,0) (S) (P:BIOL 1060, 1061; DESN 3030; GEOL 1700; ITEC 2090, 3300; PSYC 3241; or program coordinator approval)
    PLAN 3021. Introduction to Planning Techniques (3) (F)
    PLAN 3051. Introduction to GIS in Planning (3) (F)
    PLAN 4003. Urban Form and Design (3) (S)
    Mechanical Technology:
    CHEM 1020. General Descriptive Chemistry (4) (S) (FC:SC)
    CHEM 1021. General Descriptive Chemistry Laboratory (1) (S) (FC:SC)
    DESN 3230, 3231. Rapid Prototyping (3,0) (S) (P: DESN 3032; IENG 2076)
    DESN 3234, 3235. Jig and Fixture Design (3,0) (F) (P: DESN 3032; ITEC 2090; IENG 2076)
    DESN 3236, 3237. Geometric Dimensioning and Tolerancing (3,0) (F) (P: DESN 3032; MATH 1074; ITEC 3200 or MATH 2283)
    IENG 2076, 2077. Introduction to Computer Numerical Control (CNC) (3,0) (F,S) (P: DESN 2034)
    IENG 3020, 3021. Robotics in Computer Integrated Manufacturing (3,0) (S) (P: IENG 2076, ITEC 2090)
    IENG 3300. Plant Layout and Materials Handling (3) (F) (P/C: ITEC 3290; P: IENG 2020)
  4. Approved electives to complete requirements for graduation. - 8 s.h.

BS in Industrial Distribution and Logistics

Richard W. Monroe, Coordinator, 402 Science and Technology Building

The industrial distribution and logistics program is accredited by the Association of Technology, Management, and Applied Engineering.

Minimum degree requirement is 126 s.h. of credit as follows:

  1. Foundations curriculum requirements (For information about courses that carry foundations curriculum credit see Liberal Arts Foundations Curriculum) including those listed below.42 s.h.
    COMM 2410. Public Speaking (3) (F,S,SS) (FC:FA) or COMM 2420. Business and Professional Communication (3) (F,S,SS) (FC:FA)
    ECON 2113. Principles of Microeconomics (3) (F,S,SS) (FC:SO)
    MATH 1065. College Algebra (3) (F,S,SS) (FC:MA) (P: Appropriate score on math placement test or math sections of the SAT/ACT)
    PSYC 1000. Introductory Psychology (3) (F,S,SS) (FC:SO)
    PSYC 3241. Personnel and Industrial Psychology (3) (F,S,SS) (FC:SO) (P: PSYC 1000 or 1060)
  2. Core - 57 s.h.
    IDIS 2771. Introduction to Distribution and Logistics (3)
    IDIS 2830. ERP Systems for Distributors (3) (Formerly IDIS 3830)
    IDIS 3700. Transportation Logistics (3) (Formerly IDIS 3800) (P: IDIS 2771)
    IDIS 3790. Technical Presentations (3) (P: ITEC 2000 or MIS 2223)
    IDIS 3795, 3796. Distributor Sales and Branch Management (3,0) (F) (P: IDIS 2771, 2830)
    IDIS 3815. Supply Chain Logistics (3) (P: IDIS 2771, 2830)
    IDIS 3820. Purchasing Logistics (3) (Formerly IDIS 3805) (P: IDIS 2830, 3815)
    IDIS 3835. Security and Risk Analysis for Distributors (3) (P: IDIS 3815, 3700)
    IDIS 3850, 3851. Warehousing and Materials Handling (3,0) (Formerly IDIS 3780, 3781) (P:IDIS 2771, 2830; ITEC 2000 or MIS 2223)
    IDIS 4785. Strategic Pricing for Distributors (3) (Formerly IDIS 3825) (P: IDIS 3820)
    IDIS 4790. Global Logistics (3) (Formerly IDIS 3785) (P:IDIS 3700, 3815)
    IDIS 4800. Distribution and Logistics Capstone (3) (P: Junior standing; IDIS 3790; ITEC 3300; IDIS major)
    IDIS 4802. Distribution Research (3) (P: IDIS 3815; senior standing)
    ITEC 3290. Technical Writing (3) (WI) (F,S) (P: ENGL 1200)
    ITEC 3292. Industrial Safety (3) (F,S) (P: Junior status)
    ITEC 3300. Technology Project Management (3) (WI) (F,S) (P: ENGL 1200; ITEC 2000 or MIS 2223)
    ITEC 3800. Cost and Capital Project Analysis (3) (S) (P: MATH 1065; ITEC 2000 or 3000 or MIS 2223)
    ITEC 4293. Industrial Supervision (3) (WI) (F,S) (P: Senior status; or consent of instructor)
    ITEC 4300. Quality Assurance Concepts (3) (F,S) (P: ITEC 3200 or MATH 2283)
  3. Cognates - 12 s.h.
    ACCT 2101. Survey of Financial and Management Accounting (3) (F,S) (P: MATH 1065)
    FINA 2244. Legal Environment of Business (3) (F,S,SS)
    MATH 2283. Statistics for Business (3) (F,S,SS) (P: MATH 1065 or 1066 or equivalent) or ITEC 3200. Introduction to Statistical Process Control (3) (F,S) (P: MATH 1065 or 1065; ITEC 2000 or 3000 or MIS 2223)
    ITEC 2000. Industrial Technology Applications of Computer Systems (3) (F,S) or
    MIS 2223. Introduction to Computers (3) (F,S,SS)
  4. Electives to complete requirements for graduation. - 15 s.h.

BS in Industrial Engineering Technology

Merwan B. Mehta, Coordinator, 244 Slay Hall

Minimum degree requirement is 126 s.h. of credit as follows:

  1. Foundations curriculum requirements (For information about courses that carry foundations curriculum credit see Liberal Arts Foundations Curriculum) including those listed below.42 s.h.
    COMM 2410. Public Speaking (3) (F,S,SS) (FC:FA) or COMM 2420. Business and Professional Communication (3) (F,S,SS) (FC:FA)
    ECON 2113. Principles of Microeconomics (3) (F,S,SS) (FC:SO)
    MATH 1065. College Algebra (3) (F,S,SS) (FC:MA) (P: Appropriate score on math placement test or math sections of the SAT/ACT) or MATH 1066. Applied Mathematics for Decision Making (3) (F,S,SS) (FC:MA) (P: Appropriate score on math placement test or approval of dept chair)
    PHYS 1250, 1260. General Physics (3,3) (F,S,SS) (FC:SC) (P for 1250: MATH 1065 or 1066; P for 1260: PHYS 1250)
    PHYS 1251, 1261. General Physics Laboratory (1,1) (F,S,SS) (FC:SC) (C for 1251: PHYS 1250 or 2350; C for 1261: PHYS 1260 or 2260)
    PSYC 1000. Introductory Psychology (3) (F,S,SS) (FC:SO)
    PSYC 3241. Personnel and Industrial Psychology (3) (F,S,SS) (FC:SO) (P: PSYC 1000 or 1060)
  2. Core - 69 s.h.
    DESN 2034, 2035. Engineering Graphics I (3,0) (F,S) (P: ITEC 2000 or MIS 2223)
    DESN 2036, 2037. Computer-Aided Design and Drafting (3,0) (F,S) (P: DESN 2034)
    IENG 2020, 2021. Materials and Processes Technology (3,0) (WI*) (F,S) (P/C: ITEC 2000 or MIS 2223)
    IENG 2076, 2077. Introduction to Computer Numerical Control (CNC) (3,0) (F,S) (P: DESN 2034)
    IENG 3020, 3021. Robotics in Computer Integrated Manufacturing (3,0) (S) (P: IENG 2076; ITEC 2090)
    IENG 3300. Plant Layout and Materials Handling (3) (F) (P/C ITEC 3290; P: IENG 2020)
    IENG 3600. Statics and Strength of Materials (3) (S) (P: IENG 2020, MATH 1074)
    IENG 4020. Manufacturing System Planning (3) (F) (P: ITEC 3200, MATH 2119)
    IENG 4023. Advanced Manufacturing Systems (3) (S) (P: IENG 3300)
    IENG 4024, 4025. Electromechanical Systems Integration (3,0) (F) (P: DESN 2036; IENG 3020)
    IENG 4200. Work Methods and Ergonomic Analysis (3) (S) (P: ITEC 3200 or MATH 2283)
    IENG 4900. Capstone (3) (S) (P: Senior Standing)
    ITEC 2000. Industrial Technology Applications of Computer Systems (3) (F,S)
    ITEC 2054, 2055. Electricity/Electronics Fundamentals (3,0) (F,S) (P/C: MATH 1074 or 1083 or 1085)
    ITEC 2080, 2081. Thermal and Fluid Systems (3,0) (F,S) (P: IENG 2020)
    ITEC 2090, 2091. Electromechanical Systems (3,0) (F,S) (P: ITEC 2054)
    ITEC 3200. Introduction to Statistical Process Control (3) (F,S) (P: MATH 1065 or 1066; ITEC 2000 or 3000 or MIS 2223)
    ITEC 3290. Technical Writing (3) (WI) (F,S,SS) (P: ENGL 1200)
    ITEC 3292. Industrial Safety (3) (F,S) (P: Junior standing)
    ITEC 3300. Technology Project Management (3) (F,S) (WI) (P: ENGL 1200; ITEC 2000 or MIS 2223)
    ITEC 3800. Cost and Capital Project Analysis (3) (F,S) (P: MATH 1065; ITEC 2000 or 3000 or MIS 2223)
    ITEC 4293. Industrial Supervision (3) (WI) (F,S) (P: Senior standing or approval of instructor)
    ITEC 4300. Quality Assurance Concepts (3) (F,S) (P: ITEC 3200 or MATH 2283)
  3. Cognates - 6 s.h.
    CHEM 1020 General Descriptive Chemistry (4) (F,S)
    MATH 1074. Applied Trigonometry (2) (F,S,SS) (P: MATH 1065)
  4. Electives to complete requirements for graduation. - 9 s.h.

BS in Industrial Technology

David L. Batts, Coordinator, 230 Slay Building

The industrial technology program is accredited by the Association of Technology, Management, and Applied Engineering.

Student must have an associate of applied science degree from an approved technical program. Minimum degree requirement is 126 s.h. of credit as follows. Students must complete at ECU a minimum of 42 s.h. credit of upper division core and concentration courses. Industrial technology courses completed at ECU and transfer courses must total at least 66 s.h. All students pursuing a bachelor of science in industrial technology through distance education (online) are required to complete ITEC 3000 in their initial semester of enrollment at East Carolina University. For distance education (online) students only, ITEC 3000 will fulfill 3 s.h. of the required 27 s.h. in their chosen concentration area. ITEC 3100, 4100 or any course that does not meet as a class may not be used as upper division core or concentration courses.

  1. Foundations curriculum requirements (For information about courses that carry foundations curriculum credit see Liberal Arts Foundations Curriculum) including those listed below.42 s.h.
    COMM 2410. Public Speaking (3) (F,S,SS) (FC:FA) or COMM 2420. Business and Professional Communication (3) (F,S,SS) (FC:FA)
    ECON 2113. Principles of Microeconomics (3) (F,S,SS) (FC:SO)
    MATH 1065. College Algebra (3) (F,S,SS) (FC:MA) (P: Appropriate score on math placement test or math sections of the SAT/ACT) or MATH 1066. Applied Mathematics for Decision Making (3) (F,S,SS) (FC:MA) (P: Appropriate score on math placement test or approval of dept chair)
    PSYC 1000. Introductory Psychology (3) (F,S,SS) (FC:SO)
    PSYC 3241. Personnel and Industrial Psychology (3) (F,S,SS) (FC:SO) (P: PSYC 1000 or 1060)
  2. Lower Division Core - 24 s.h.
    Transfer technical courses up to 24 s.h. or approved technical courses.
  3. Upper Division Core - 15 s.h.
    ITEC 3200. Introduction to Statistical Process Control (3) (F,S) (P: MATH 1065 or 1066; ITEC 2000 or 3000 or MIS 2223)
    ITEC 3290. Technical Writing (3) (WI) (F,S,SS) (P: ENGL 1200)
    ITEC 3300. Technology Project Management (3) (WI) (F,S) (P: ENGL 1200; ITEC 2000 or MIS 2223)
    ITEC 3800. Cost and Capital Project Analysis (3) (F,S) (P: MATH 1065; ITEC 2000 or 3000 or MIS 2223)
    ITEC 4293. Industrial Supervision (3) (WI) (F,S) (P: Senior standing or approval of instructor)
  4. Concentrations (choose one) - 27 s.h.
    Architectural Technology
    DESN 3030, 3031. Architectural Drafting (3,0) (F) (P: DESN 2036 or IDSN 2281; ITEC 2080; or program coordinator approval)
    DESN 3032, 3033. Engineering Graphics II (3,0) (S) (P: DESN 2036: ITEC 2080; PHYS 1250; C: ITEC 2090; or program coordinator approval)
    DESN 3036, 3037. Architectural Design and Drafting (3,0) (F) (P: DESN 3030, 3032; or program coordinator approval)
    DESN 3038, 3039. Sustainable Design (3,0) (S) (P:BIOL 1060, 1061; DESN 3030; GEOL 1700; ITEC 2090, 3300; PSYC 3241; or program coordinator approval)
    PLAN 3021. Introduction to Planning Techniques (3) (F)
    PLAN 3051. Introduction to GIS in Planning (3) (F)
    PLAN 4003. Urban Form and Design (3) (S)
    Approved technical electives (6 s.h.)
    Bioprocess Manufacturing
    ITEC 3292. Industrial Safety (3) (F,S) (P: Junior standing)
    ITEC 4150. Microbiology for Industrial Processing (3) (S EY) (P: Admitted to bioprocess manufacturing concentration within BS industrial technology degree)
    ITEC 4250. Engineering for Food Safety and Sanitation (3) (F OY) (P: Admitted to bioprocess manufacturing concentration within BS industrial technology degree)
    ITEC 4300. Quality Assurance Concepts (3) (F,S) (P: ITEC 3200 or MATH 2283)
    ITEC 4350. Separation Techniques for Industrial Processing (3) (S OY) (P: Admitted to bioprocess manufacturing concentration within BS industrial technology degree)
    ITEC 4450. Waste Treatment Techniques for Industrial Processing (3) (S OY) (P: Admitted to bioprocess manufacturing concentration within BS industrial technology degree)
    ITEC 4550. Quality in Regulatory Environments (3) (F, EY) (P: Admitted to bioprocess manufacturing concentration within BS industrial technology degree)
    Approved technical electives (6 s.h.)
    Distribution and Logistics
    IDIS 2771. Introduction to Distribution and Logistics (3)
    IDIS 2830. ERP Systems for Distributors (3) (Formerly IDIS 3830)
    IDIS 3700. Transportation Logistics (3) (Formerly IDIS 3800) (P: IDIS 2771)
    IDIS 3815. Supply Chain Logistics (3) (P: IDIS 2771, 2830)
    IDIS 3820. Purchasing Logistics (3) (Formerly IDIS 3805) (P: IDIS 2830, 3815)
    IDIS 3835. Security and Risk Analysis for Distributors (3) (P: IDIS 3700)
    IDIS 4785. Strategic Pricing for Distributors (3) (Formerly IDIS 3825) (P: IDIS 3820)
    IDIS 4790. Global Logistics (3) (Formerly IDIS 3785) (P: IDIS 3700, 3815)
    Approved technical electives (3 s.h.)
    Health Information Technologies
    HIMA 3000. Medical Terminology for Health Professionals (3) (F, S, SS)
    HIMA 3120. Health Care Delivery Systems (3) (F) (P: HSMA 2000; P/C: HSMA 3030 or consent of instructor)
    HIMA 4030. Quality Management in Health Care (3) (S) (P: HIMA 3113, 3120; or consent of instructor)
    HSMA 2000. Professional Roles and Environments in Health Care (3) (SL*) (F,S,SS)
    HSMA 3020. Health Care Payment Systems (3) (S) (P: HSMA 2000; P/C: HIMA 3120; HSMA 3035; HSMA 3030 or consent of instructor)
    HSMA 3025. Professional Ethical Codes and Law in Health Care (3) (F) (P: HSMA 2000; P/C: HSMA 3030; or consent of instructor)
    HSMA 3035. Interpersonal Team Skills for Health Care Supervisors and Practitioners (3) (S) (P: HSMA 2000; P/C: HSMA 3030 or consent of instructor)
    HSMA 4010. Health Information Management (3) (F) (P: HIMA 3120; HSMA 3035)
    Approved technical electives (3 s.h.)
    Industrial Supervision
    IDIS 2771. Introduction to Distribution and Logistics (3) (F,S)
    IDIS 3790. Technical Presentations for Industry (3) (F,S) (P: ITEC 2000 or MIS 2223)
    IDIS 3815. Supply Chain Logistics (3) (F,S) (P: IDIS 2771)
    IENG 3300. Plant Layout and Materials Handling (3) (F) (P/C ITEC 3290; P: IENG 2020)
    IENG 4023. Advanced Manufacturing Systems (3) (S) (P: IENG 3300)
    ITEC 3292. Industrial Safety (3) (S) (P: Junior standing)
    ITEC 4300. Quality Assurance Concepts (3) (F,S) (P: ITEC 3200 or MATH 2283)
    Approved technical electives (6 s.h.)
    Information and Computer Technology
    Choose 27 hours from below:
    ICTN 2530, 2531. Network Environment II (3,0) (F,S) (P: ICTN 1500)
    ICTN 2900, 2901. Fundamental Network Security (3,0) (F) (P: ICTN 2150)
    ICTN 3250, 3251. Internetwork Routing Technology (3,0) (F) (P: Current CCNA certification)
    ICTN 3540, 3541. Network Environment III (3,0) (F) (P: ICTN 2510, 2530)
    ICTN 3900, 3901. Web Services Management (3,0) (F) (P: ICTN 2530)
    ICTN 4010, 4011. User Application Management and Emerging Technologies (3,0) (F) (P: ICTN 2510, 2530)
    ICTN 4040. Enterprise Information Security (3) (S) (P: ICTN 2530, 2900)
    ICTN 4064. Regulations and Policies (3) (S) (P: ICTN 2150; P/C; FINA 2244)
    ICTN 4150, 4151. Switching Network Technology (3,0) (F) (P: Current CCNA certification)
    ICTN 4200, 4201. Intrusion Detection Technologies (3,0) (F) (P: ICTN 2530, 2900)
    ICTN 4250, 4251. Enterprise Network Security Technology (3,0) (S) (P: Current CCNA certification)
    ICTN 4310. Digital Forensics (3) (P: ICTN 2530, 2900)
    ICTN 4402, 4404, 4406, 4408. Special Topics (1,2,3,4) (P: Consent of instructor)
    ICTN 4590, 4591. Network Maintenance and Troubleshooting (3,0) (S) (P: Current CCNA certification; ICTN 3250, 4150)
    ICTN 4600, 4601. Enterprise Information Technology Management (3,0) (S) (P: ICTN 2154, 2530)
    ICTN 4700, 4701. Virtualization Technologies (3,0) (P: ICTN 2530)
    ICTN 4750. Enterprise Data Storage Technologies (3) (P: ICTN 2530)
    ICTN 4800, 4801. Information Assurance Technologies (3,0) (F) (P: ICTN 2530, 2900)
    Manufacturing Systems
    IENG 3300. Plant Layout and Materials Handing (3) (F) (P/C: ITEC 3290, P: IENG 2020)
    IENG 4020. Manufacturing System Planning (3) (F) (P: ITEC 3200)
    IENG 4023. Advanced Manufacturing Systems (3) (S) (P: IENG 3300)
    IENG 4200. Work Methods and Ergonomic Analysis (3) (S) (P: ITEC 3200 or MATH 2283)
    ITEC 3292. Industrial Safety (3) (F,S) (P: Junior standing)
    ITEC 4300. Quality Assurance Concepts (3) (F,S) (P: ITEC 3200 or MATH 2283)
    Approved technical electives (9 s.h.)
    Mechanical Technology
    DESN 3032, 3033. Engineering Graphics II (3,0) (S) (P: DESN 2036; ITEC 2080; PHYS 1250; C: ITEC 2090; or program coordinator approval)
    DESN 3230, 3231. Rapid Prototyping (3,0) (S) (P: DESN 3032; IENG 2076)
    DESN 3234, 3235. Jig and Fixture Design (3,0) (F) (P: DESN 3032; ITEC 2090; IENG 2076)
    DESN 3236, 3237. Geometric Dimensioning and Tolerancing (3,0) (F) (P: DESN 3032; MATH 1074; ITEC 3200 or MATH 2283)
    IENG 2076, 2077. Introduction to Computer Numerical Control (CNC) (3,0) (F) (P: DESN 2034)
    IENG 3020, 3021. Robotics in Computer Integrated Manufacturing (3,0) (S) (P: IENG 2076; ITEC 2090)
    IENG 3300. Plant Layout and Materials Handling (3) (F) (P/C: ITEC 3290; P: IENG 2020)
    Approved technical electives (6 s.h.)
  5. Cognates - 5 s.h.
    FINA 2244. Legal Environment of Business (3) (F,S,SS)
    MATH 1074. Applied Trigonometry (2) (F,S,SS) (P: MATH 1065)
  6. Approved electives to complete requirements for graduation.

BS in Information and Computer Technology

Philip J. Lunsford, Coordinator, C123 Science and Technology Building

The information and computer technology program is accredited by the Association of Technology, Management, and Applied Engineering. Credit toward an information and computer technology major will not be given for any ICTN course with a grade less than C (2.0). Minimum degree requirement is 126 s.h. credit as follows:

  1. Foundations curriculum requirements (For information about courses that carry foundations curriculum credit see Liberal Arts Foundations Curriculum) including those listed below.42 s.h.
    COMM 2410. Public Speaking (3) (F,S,SS) (FC:FA) or COMM 2420. Business and Professional Communication (3) (F,S,SS) (FC:FA)
    ECON 2113. Principles of Microeconomics (3) (F,S,SS) (FC:SO)
    MATH 1065. College Algebra (3) (F,S,SS) (FC:MA) (P: Appropriate score on math placement test or math sections of the SAT/ACT) or MATH 1066. Applied Mathematics for Decision Making (3) (F,S,SS) (FC:MA) (P: Appropriate score on math placement test or approval of dept chair)
    PHYS 1250, 1260. General Physics (3,3) (F,S,SS) (FC:SC) (P for 1250: MATH 1065 or 1066; P for 1260: PHYS 1250)
    PHYS 1251, 1261. General Physics Laboratory (1,1) (F,S,SS) (FC:SC) (C for 1251: PHYS 1250 or 2350; C for 1261: PHYS 1260 or 2260)
    PSYC 1000. Introductory Psychology (3) (F,S,SS) (FC:SO)
    PSYC 3241. Personnel and Industrial Psychology (3) (F,S,SS) (FC:SO) (P: PSYC 1000 or 1060)
  2. Lower Division Core - 24 s.h.
    ICTN 1500, 1501. PC Hardware (3,0) (F,S)
    ICTN 2150, 2151. Network Fundamentals (3,0) (F,S)
    ICTN 2154, 2155. Digital Communication Systems (3,0) (F,S) (P: ICTN 2150)
    ICTN 2158, 2159. Computer Network Technology (3,0) (F,S) (P: ICTN 2154)
    ICTN 2510, 2511. Network Environment I (3,0) (F) (P: ICTN 1500)
    ICTN 2530, 2531. Network Environment II (3,0) (S) (P: ICTN 1500)
    ICTN 2732. Scripting for Information Technology (3) (S) (P: ITEC 2000; P/C: ICTN 2530)
    ITEC 2000. Industrial Technology Applications of Computer Systems (3) (F,S) or ITEC 3000. Internet Tools Technology (3) (F,S) (P: MIS 2223 or ITEC 2000 or equivalent experience) or equivalent.
  3. Upper Division Core - 24 s.h.
    ICTN 2900, 2901. Fundamental Network Security (3,0) (F) (P: ICTN 2150)
    ICTN 3540, 3541. Network Environment III (3,0) (F) (P: ICTN 2530)
    ICTN 4000. Network Internship (3) (F,S,SS) (P: Junior standing and ICTN major)
    ICTN 4020. Senior Information and Computer Technology Capstone Design Project I (1) (WI) (F) (P: Senior standing,
    ICTN 4022. Senior Information and Computer Technology Capstone Design Project II (2) (WI) (S) (P: ICTN 4020)
    ICTN 4040. Enterprise Information Security (3) (S) (P: ICTN 2530, 2900)
    IDIS 3790. Technical Presentations (3) (P: ITEC 2000 or MIS 2223)
    ITEC 3290. Technical Writing (3) (WI) (F,S,SS) (P: ENGL 1200)
    ITEC 3300. Technology Project Management (3) (WI) (F,S) (P: ENGL 1200; ITEC 2000 or MIS 2223)
  4. Concentration area (Choose one.).12 s.h.
    Computer Networking:
    ICTN 3250, 3251. Internetwork Routing Technology (3,0) (F) (P: Current CCNA certification)
    ICTN 4150, 4151. Switching Network Technology (3,0) (F) (P: Current CCNA certification)
    ICTN 4250, 4251. Enterprise Network Security Technology (3,0) (S) (P: Current CCNA certification)
    ICTN 4590, 4591. Network Maintenance and Troubleshooting (3,0) (WI) (S) (P: Current CCNA certification)
    Information Security:
    ICTN 4064. Regulations and Policies (3) (S) (P: ICTN 2150; P/C: FINA 2244)
    ICTN 4200, 4201. Intrusion Detection Technologies (3,0) (F) (P: ICTN 2530, 2900)
    ICTN 4600, 4601. Enterprise Information Technology Management (3,0) (S) (P: ICTN 2154, 2530)
    ICTN 4800, 4801. Information Assurance Technologies (3,0) (F) (P: ICTN 2530, 2900)
    Information Technology:
    ICTN 3900, 3901. Web Services Management (3,0) (F) (P: ICTN 2530)
    ICTN 4010, 4011. User Application Management and Emerging Technologies (3,0) (F) (P: ICTN 2510, 2530)
    ICTN 4064. Regulations and Policies (3) (S) (P: ICTN 2150; P/C; FINA 2244)
    ICTN 4600, 4601. Enterprise Information Technology Management (3,0) (S) (P: ICTN 2154, 2530)
  5. Cognates - 12 s.h.
    FINA 2244. Legal Environment of Business (3) (F,S,SS)
    ITEC 3200. Introduction to Statistical Process Control (3) (F,S) (P: MATH 1065 or 1066; ITEC 2000 or 3000 or MIS 2223) or MATH 2283. Statistics for Business (3) (F,S,SS) (P: MATH 1065 or 1066 or equivalent)
    ITEC 3800. Cost and Capital Project Analysis (3) (F,S) (P: MATH 1065; ITEC 2000 or 3000 or MIS 2223) or ACCT 2101 Survey of Financial and Managerial Accounting (3) (F,S) (P: MATH 1065 or 1066) or ACCT 2401. Financial Accounting (3) (F,S,SS) (P: MATH 1065 or 1066 or 2119 or 2121 or 2171)
    ITEC 4293. Industrial Supervision (3) (WI) (F,S) (P: Senior standing or approval of instructor) or MGMT 3202. Fundamentals of Management (3) (F,S,SS) (P: ECON 1000 or 2113)
  6. Approved electives to complete requirements for graduation.

Architectural Design Technology Minor


The architectural design technology design minor requires a minimum of 30 s.h. of credit:
DESN 2034, 2035. Engineering Graphics I (3,0) (F,S) (P: ITEC 2000 or MIS 2223)
DESN 2036, 2037. Computer-Aided Design and Drafting (3,0) (F,S) (P: DESN 2034)
DESN 3030, 3031. Architectural Drafting (3,0) (F) (P: DESN 2036 or IDSN 2281; ITEC 2080; or program coordinator approval)
DESN 3032, 3033. Engineering Graphics II (3,0) (F,S) (P: DESN 2036; ITEC 2080; PHYS 1250; C: ITEC 2090; or program coordinator approval)
DESN 3036, 3037. Architectural Design and Drafting (3,0) (F) (P: DESN 3030, 3032; or program coordinator approval)
DESN 3038, 3039. Sustainable Design (3,0) (S) (P:BIOL 1060, 1061; DESN 3030; GEOL 1700; ITEC 2090, 3300; PSYC 3241; or program coordinator approval)
ITEC 2000. Industrial Technology Applications of Computer Systems (3) (F,S) or MIS 2223. Introduction to Computers (3) (F,S,SS)
And 9 s.h. from the following:
PLAN 1900. Planning for the Human Environment (3) (F,S,SS)
PLAN 3021. Introduction to Planning Techniques (3) (F)
PLAN 3051. Introduction to GIS in Planning (3) (F) (P: PLAN 3410 or consent of instructor)
PLAN 4003. Urban Form and Design (3) (S)
PLAN 4021. Advanced GIS Applications in Planning (3) (S) (P: PLAN 3051 or GEOG 2410 or consent of instructor)
PLAN 4046. Planning and Design Studio (3) (F,S)
PLAN 5985. Historic Preservation Planning (3)

Industrial Technology Management Minor


The industrial technology management minor requires 24 s.h. of credit as follows:
FINA 2244. Legal Environment of Business (3) (F,S,SS)
IDIS 2771. Introduction to Distribution and Logistics (3)
ITEC 3200. Introduction to Statistical Process Control (3) (F,S) (P: MATH 1065 or 1066; ITEC 2000 or 3000 or MIS 2223)
ITEC 3290. Technical Writing (3) (WI) (F,S,SS) (P: ENGL 1200)
ITEC 3292. Industrial Safety (3) (F,S) (P: Junior standing)
ITEC 3300. Technology Project Management (3) (WI) (F,S) (P: ENGL 1200; ITEC 2000 or MIS 2223)
ITEC 3800. Cost and Capital Project Analysis (3) (F,S) (P: MATH 1065; ITEC 2000 or 3000 or MIS 2223)
ITEC 4293. Industrial Supervision (3) (WI) (F,S) (P: Senior standing or approval of instructor)

Information and Computer Technology Minor


The information and computer technology minor requires 24 s.h. of credit.
ICTN 1500, 1501. PC Hardware (3,0) (F,S)
ICTN 2150, 2151. Network Fundamentals (3,0) (F,S)
ICTN 2154, 2155. Digital Communication Systems (3,0) (F,S) (P: ICTN 2150)
ICTN 2158, 2159. Computer Networking Technology (3,0) (F,S) (P: ICTN 2154)
ICTN 2510. 2511. Network Environment I (3,0) (F) (P: ICTN 1500)
ICTN 2530, 2531. Network Environment II (3,0) (S) (P: ICTN 1500)
ICTN 2900, 2901. Fundamental Network Security (3,0) (F) (P: ICTN 2150)
ICTN 4040. Enterprise Information Security (3) (S) (P: ICTN 2530, 2900)

Mechanical Design Technology Minor


The mechanical design technology minor requires 30 s.h. of credit:
DESN 2034, 2035. Engineering Graphics I (3,0) (F,S) (P: ITEC 2000 or MIS 2223)
DESN 2036, 2037. Computer-Aided Design and Drafting (3,0) (F,S) (P: DESN 2034)
DESN 3032, 3033. Engineering Graphics II (3,0) (F,S) (P: DESN 2036; ITEC 2080; PHYS 1250; C: ITEC 2090; or program coordinator approval)
DESN 3230, 3231. Rapid Prototyping (3,0) (S) (P: DESN 3032; IENG 2076)
DESN 3234, 3235. Jig and Fixture Design (3,0) (F) (P: DESN 3032; ITEC 2090; IENG 2076)
IENG 2076, 2077. Introduction to Computer Numerical Control (CNC) (3,0) (F) (P: DESN 2034)
ITEC 2000. Industrial Technology Applications of Computer Systems (3) (F,S) or MIS 2223. Introduction to Computers (3) (F,S,SS)
ITEC 2054, 2055. Electricity/Electronics Fundamentals (3,0) (F,S) (P/C: MATH 1074 or 1083 or 1085)
ITEC 2090, 2091. Electromechanical Systems (3,0) (F,S) (P: ITEC 2054)
MATH 1065. College Algebra (3) (F,S,SS) (FC:MA) (P: Appropriate score on math placement test or math sections of the SAT/ACT)